• Viewbrite Safety Products
  • Viewbrite Safety Products
  • Viewbrite Safety Products

Lime T-Shirts And Their Protection Classifications

A lime t-shirts may be the height of fashion, and most bright colored clothing might always be popular. However, these shirts can also be worn to protect life and property when worn in potentially dangerous conditions. There are three classifications of standards used to determine which is appropriate for the situation. Let’s take a look at some of these requirements.

Class 1

Class 1 garments are to be worn in situations where the least amount of visibility is required, and speed limits are set at 25PMH, or less. These are the work areas where the employee can devote their full attention to oncoming traffic, and the surrounding backgrounds are not complicated. The standard requires 155 sq inches of reflective tape, or 6.46 linear feet of 2-inch tape, or 9.39 linear feet of 1 3/8-inch tape on products such as safety vest.

This low visibility clothing is recommended for such workers as drivers of delivery trucks, people who retrieve shopping carts, and parking lot attendants. They are also worn by employees who are working on sidewalk or roadside repairs, and maintenance crews, and in warehouses where the worker is involved in controlling equipment traffic.

Class 2

Class 2 garments are to be worn in areas where the speed limit is over 25MPH, and when the surrounding scenery is more complex. In these situations the worker might often distracted in performing their tasks which prevents them from giving their undivided attention to oncoming traffic. This class of clothing must have a minimum of 201 square inches of reflective tape, or 8.375 linear feet of 2-inch tape or 12.2 linear feet of 1 3/8-inch tape.

Work settings where Class 2 clothing is required can include less hazardous accident site investigations and EMT responders, law enforcement workers, and forestry management. Airport ground crews and baggage handlers, toll gate operators, parking lot attendants, and school crossing guards must wear these. Slow traffic involvement survey crews, railroad workers including equipment operators, and utility workers are also under Class 2 regulations.

Class 3

Class 3 requirements provide the maximum level of visibility for workers in high risk areas where they are involved in many different tasks which require their undivided attention, and may be required to work in all types of weather conditions. When speed limits are over 50MPH, it is crucial that workers are as conspicuous as they can be. Its reflective requirements are a minimum of 155 square inches of reflective tape, or 6.46 linear feet of 2-inch tape or 9.39 linear feet of 1 3/8-inch tape.

The recommended situations for wearing Class 3 are for people engaged in such activities as EMT response, and accident site management and investigation. Flagging and survey crews, and utility workers may be involved in situations where speed limits are over 50MPH, and road construction or railway workers are also required to wear this classification, even when operating vehicles or other equipment.

Which Do You Need?

A lime t-shirt can be fun clothing for any casual wear event, but they are also used for safety issues where potential loss of life or limb may exist. Traffic and crowd control workers need to be protected from accidents and these bright colors on products such as safety vest, also help people to identify authorized workers, who can call for emergency medical teams if there is a life threatening situation.

Comments are closed.